Posted: June 26, 2013

SUNNYVALE, Calif.–Spirent Communications, today announced support for Carrier Aggregation testing on its CS8 Mobile Device Tester.The CS8 helps to ensure LTE-Advanced (3GPP Release 10) Carrier Aggregation functionality meets the performance expectations of operators who plan to deploy the technology.

“Meaningful testing of carrier aggregation needs much more than a radio-channel emulation solution”

Carrier Aggregation is crucial for meeting the wireless uplink and downlink data rate targets set by the industry and required for data-hungry applications and services. Meeting these expectations requires at least 20 MHz of bandwidth in each direction, but very few network operators deploying LTE have sufficient contiguous spectrum. Carrier Aggregation addresses this problem by combining radio channels within and across bands to increase user data rates, reduce latency and enable LTE downlink throughput speeds of up to 150Mbps.

LTE Strategy 2013 – 2018 – All you need to know about LTE Market!

“Meaningful testing of carrier aggregation needs much more than a radio-channel emulation solution,” said Brock Butler, mobile device testing architect, at Spirent Communications. “It also requires the ability to readily create the protocol interactions that can exercise the mobile device’s ability to manage all possible combinations of carrier aggregation scenarios. The CS8 is the only single-box network emulation solution to support the aggregation of two 10MHz carriers, each with 2×2 MIMO and independent fading – features that are critical for accurately and rapidly testing realistic deployment scenarios.”

CS8’s direct access to the LTE protocol stack offers a high degree of flexibility and configurability in carrier aggregation testing across all protocol layers—from PHY/MAC to RRC and RRM. Additionally, CS8 is able to support all LTE frequency bands in a single box with multiple bandwidth combinations.

CS8, targeted at research and development of cellular phones, tablets, data cards and machine-to-machine cellular modules, bundles industry-leading network emulation with innovative testing software and subject matter expertise into a solution that addresses the needs of design engineers. CS8 supports Intra-band and Inter-band carrier aggregation, SISO, 2×2 MIMO, 4×2 MIMO for each carrier, cross-carrier scheduling, as well as, integrated independent fading and AWGN (added noise) for each component carrier.

Post a Comment

Comments are closed